Anybody know how to head space a Savage ML10?
Anybody know how to head space a Savage ML10?
Retired sniper. You can run, But you will only die tired!!!
Ok, I'll bite....why do you think you need to mess with the headspace on a muzzleloader?
"Life' is tough. It's even tougher if you're stupid." ~ John Wayne
“Under certain circumstances, urgent circumstances, desperate circumstances, profanity provides a relief denied even to prayer.” —Mark Twain
Because I have a stuck breech plug and need to brake it down to remove stuck plug.
Retired sniper. You can run, But you will only die tired!!!
They space off the primer
But I would index mark it then put it back to the marks when your done. But first I'd soak it in kroil that will help with the plug
Thanks Tyler, Sometimes you can't see the forest for the tree's. That's a good idea. I did soak it with kroil yesterday hopefully it will break loose today.
Doug
Retired sniper. You can run, But you will only die tired!!!
Still have the old-style breech plug with the 4-toothed removal tool? If so it would be beneficial to upgrade to the newer 3/8" hex head breech plug as it makes life (and removing the plug) much easier. My old style plug stuck on me this spring and I thought for sure my walnut stock was going to break before the plug broke loose. Finally got it though - that's when I decided it was time I upgraded.
"Life' is tough. It's even tougher if you're stupid." ~ John Wayne
“Under certain circumstances, urgent circumstances, desperate circumstances, profanity provides a relief denied even to prayer.” —Mark Twain
Bookmarks