It's a common problem in the Savage rimfires. Give Savage a call.
I recently cleaned my mark-ii, completely disassembling it. i took off the stock and got into every nook and cranny. Buttt i also took apart my bolt. I thought i put it back together correctly. But i guess not The shells will sometimes pull out, but will never eject properly. Often they will just stay in the chamber. I might of put the clip on backwards. Frankly I'm not sure... I figured i would ask before i tried taking int apart again.
It's a common problem in the Savage rimfires. Give Savage a call.
Hmm, I might have too. Squirrel season is this Saturday. I just wish I knew what I did wrong, because it fired fine before I took it apart.
Figured out i just had the c-clip the wrong direction, simple fix and lesson learned.
Cool.
However, keep an eye on it. Failures to extract are fairly common on these rifles.
Bookmarks