Is it true that you can reduce the trigger pull on an Accutrigger by simply replacing the trigger spring with the Target Accutrigger spring? I read an advertisement from a company that sells the Target spring and says replacing the spring reduces the trigger pull. They didn't say how much it would be reduced. I know the Target accutrigger can go as low as 6oz. I also heard it wouldn't make any difference because the sear is different on the Target Accutrigger. The spring is only $5 so it's not much of an investment. No sense doing it if it causes the trigger to stick because the trigger pull is too light. I can live with 1.5 or so but since it's for benchrest I'd like it a little less. Any opinions on this matter? If anyone has first hand knowledge please chime in.