glad I found this forum now I can start working on my gun. I picked it up a while back for a decent price. its a beater and wil need a new stock in the future (rear stock has a repair job).
Ok first question is where is the stored info I read on an old post that only available for paid members?
2. I need info on how to disassemble the rotary mag and or adjust spring tension. I already searched through all posts in this section.
3. schematics? anyone?
4. need to find out how to remove extractor. mine is pinned under bolt. I have removed everything and cleaned it as best as possible so the extractor and mag were the only things I didn't try without some input.
5. looking to date my savage:
I have a "N" top left near barrel just before words "model 99e"----small letter "m" lever boss looks like there may have been an oval around it but only partial left-----
left side of receiver lower frame "P","N","8","E"
serial number 1017824
6. looks like the only way to lighten the trigger is with a lighter striker spring or stone the sear?
ok I figured I have covered all my newbie questions
Reply With Quote
Bookmarks