Match Sight Mount

[SDJim]

I'm setting up my Model 10 for Palma and I'm trying to figure out how to mount a Warner rear match sight. I've got this weaver rail adapter http://www.brownells.com/.aspx/sid=2.../WR_Sight_Base but due to stacking issues, it puts the rear aperture almost 2" above the barrel center line.

Does anyone know of anyone that makes a plate type adapter that bolts to the receiver?

Any assistance would be greatly appreciated.

[Dirk]

Try removing the plate from the base on that Lipsky mount and flip it upside down.

[Balljoint]

I'm looking at my Lipsky mount right now and as said by Dirk loosen the two mount screws(with proper bit) and flip the mount

[SDJim]

I did the flip the bracket over trick and while it works, it looks strange.

I might see if I can get a lower profile receiver rail.

Thanks for the suggestions.