Results 1 to 5 of 5

Thread: 6.5 Creedmoor load testing with H4831SC

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 05-28-2013, 12:37 PM #1
    blt65
    Guest

    6.5 Creedmoor load testing with H4831SC

    The wind finally died down enough to get some load testing done. Here are my results with 4831SC. It definately got more accurate as I went up in grains. The last group was as high as I feel comfortable going, barely started to see some flow on the primers. This was out of a Savage LRP and all loads were .020 off of the lands. With 140 grain Nosler CC.

    https://www.dropbox.com/s/f4dd8xuwo1...2012.43.37.jpg
    Last edited by blt65; 05-29-2013 at 12:37 PM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Load testing distances
    By pepper savage 111 in forum Ammunition & Reloading
    Replies: 15
    Last Post: 06-27-2015, 06:09 AM
  2. Any value in testing new load…..
    By Texas10 in forum Ammunition & Reloading
    Replies: 11
    Last Post: 01-24-2015, 01:15 AM
  3. Problem during load testing
    By jsand70 in forum 110-Series Rifles
    Replies: 18
    Last Post: 07-11-2013, 11:04 PM
  4. O.A.L while load testing ?
    By acemisser in forum Ammunition & Reloading
    Replies: 17
    Last Post: 12-20-2012, 12:23 PM
  5. What distance do you do your load testing,etc
    By acemisser in forum Ammunition & Reloading
    Replies: 24
    Last Post: 11-04-2012, 11:32 PM

Members who have read this thread in the last 1 days: 0

There are no members to list at the moment.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules