factory muzzle tread

[caledohunter]

hello guys

i've got savage 111 LRH 7RM and i would like to know what's the muzzle tread 'cause i want buying a suppressor........

thank you....

[thomae]

Best thing is to measure the outside diameter with calipers and go to Sears and spend 5-6 dollars on a some thread gauges to figure out the threads...not trying to be a smart alek, but this way you will be sure.
http://www.sears.com/craftsman-screw...p-00952317000P
http://www.sears.com/craftsman-screw...p-00952316000P


http://www.harborfreight.com/hand-to...ing-tools.html

[caledohunter]

ok i think this is the best way too......i saw the thread "how removing "ak" muzzle tread" but on my rifle it's very difficult,glued ?

[Joe L]

My .308 FCP-K has 5/8x24 thread and I think that is fairly common.

[bootsmcguire]

Best to do as thomae suggested. I can tell you that to the best of my knowledge Savage has only used 3 different threads on the muzzles of their factory barrels.

1/2-28tpi for 22LR, and 224 calibers
5/8-24tpi for anything larger than 224
9/16-28 tpi for their ON/OFF adjustable muzzle brakes

Measure yours to be sure, but if you have a factory barrel it should be one of those 3.

[caledohunter]

ok that's fine guys

my rifle got factory barrel with on/off adjustable muzzle break

i think the best idea was removing muzzle break for know but there's very glued !!!!!!

[thomae]

There are several threads on how to remove a factory muzzle break. I am sure if you do a search you can find them.