Primer Problem

[earl39]

Went to the range yesterday and was shooting some of my reloads for my 25-06 and had a weird but not unique thing happen. I shot the round and noticed some smoke coming from the rear left side of the action

Did no one notice the key phrase here. These reloads are way to hot if this is not a unique thing. Yes you most likely bent the retaining pin and may have to drill the ejector out also. If you insist on shooting reloads that send smoke out the safety port on the action you will continue to have problems like this and may have some that are even worse.

[fla9-40]

Did no one notice the key phrase here. These reloads are way to hot if this is not a unique thing. Yes you most likely bent the retaining pin and may have to drill the ejector out also. If you insist on shooting reloads that send smoke out the safety port on the action you will continue to have problems like this and may have some that are even worse.

When I said "unique" I meant that I have heard of it before meaning the primer being pushed out of the brass....This is the first time I have ever experienced it.

I guess I should have worded it better/different..

Thanks earl39 for the imput