The answer is both Yes and No depending on what you're referring to as the clip/magazine box.
There are two DBM magazine designs currently in use by Savage. The top half of both (the metal box for the rounds themselves) is the same and interchangeable on both designs, but the design of the magazine base plate (that snaps onto the bottom) and how the magazine is retained in the firearm are different.
The first option is held in the firearm by a latch that is part of the magazine surround plate (or bottom metal) on the bottom of the stock and looks like this.
Note that the release lever is part of the magazine surround plate and not a part of the magazine. Also note that the magazine base plate and the magazine surround plate on these can be either metal or plastic. Typically you will only find the plastic versions on package rifles, but that may change as time goes on.
The second option is the Axis style magazine which has the retention clip as an integral part of the magazine. In addition to being used on all Axis models, it's now being used on a large number of Savage's 10/110 series package rifles - including the Trophy Hunter package rifles.
As far as I know every Savage made with this style magazine has had a synthetic stock, but don't take that as the gospel as I could be wrong. Additionally, there is no magazine surround plate on synthetic stocked models using this style magazine.