Is there a difference in the actions? I don't believe so, but would like to confirm. Thinking I am going to keep an eye out for a LA to build a 338 LM with.
Is there a difference in the actions? I don't believe so, but would like to confirm. Thinking I am going to keep an eye out for a LA to build a 338 LM with.
I think Fred (sharpshooter) answered this question in the past... IIRC the bolt lugs are considerably beefier, and the receiver has a small(er) ejection port rather than a wide-open hunting action cut for 1960's era iron sights and top loading a blind magazine. I think the receiver is also a little longer around the barrel shank region. I might be wrong... happens time to time Try searching Fred's posts for more info.
Tried searching and found some stuff, but nothing specific to this question. I already have a WMS action and may just go with a 6.5 or 7 RSAUM.
Yeah... I'm having trouble finding *any* of my posts more than about 1.5 yrs old, so I'm not sure what they did with the archives. You might have to PM sharpshooter directly for a more detailed answer.
The 110 BA is different from the standard 110. As Monte said, the lug abutments are thicker, it uses a large shank barrel, and it uses a thicker bolt head. It was specifically designed for the .338 Lapua. A standard long action for a .338 Lapua is a no-no.
"As long as there's lead in the air....there's still hope.."
Thanks. Appreciate that. Guess I need to save a little more and get a real 110BA :)
Not sure about other differences but the short action model 10BA uses a standard small shank barrel. I wouldn't think there would be much difference if any on the short action rifles. Near as I can tell the 110BAs are all chambered for magnum calibers.
A good wife and a steady job has ruined many a great hunter.
My 10BA is in 308, the stock as far as i can figure is $6 to $800 don't remember maker right now
^^^ what's the point of that post??
Fred can correct me, but I believe the 110BA in 300win is a regular 110 action the 110BA for the Lapua is the one that is different.
"Muzzle velocity is a depreciating asset, not unlike a new car, but BC, like diamonds, is forever."-German A. Salazar
As far as I know they are the same, with the exception of the bolt head diameter. I've been told that the 110 BA's have a slightly different heat treat also.
"As long as there's lead in the air....there's still hope.."
Internet rumors. They are a pain. I'm going to call savage Monday and find out for myself, as i just bought s Bartlein barrel and would prefer to put it on a savage action, but if i have to spend $1200+ on a sacrificial rifle i might as well just pick up a stiller tac338 action for $1100.
You could always buy a model 116 Alaskan hunter in 375 Ruger to use. It is a large shank action. You can find them for under $600, it's what I am going to use when I get around to building a 338 Norma Mag.
Good choice, if I don't end up doing a Savage action the Tac 338 was the one I was looking at as well.
Does anyone know if the PTG bolt heads for Lapua are the thicker version or are they standard 110 with an enlarged face????
Bookmarks