Results 1 to 9 of 9

Thread: 243 bolt face

  1. #1
    Paid Member
    Join Date
    Apr 2013
    Location
    tecumseh mo.
    Age
    71
    Posts
    3

    243 bolt face

    i am building a 243 on a older 110 action(f328089) i need a complete bolt face(springs,extractor,ect.)and rear baffle.sss has not called back and every place i have looked is out of stock.any thoughts?isnt a 243 bolt face the same as a 308?i tried savage factory and my reciever is to old for there list of 110 actions and i dont know the differance in the other models that would interchange. any help appreciated.

  2. #2
    Yes same bolt face as 308. Can't help you with where to find an exact match, but try Pacific tool and gauge for the bolt face. And if you have the rifle serial number you might be able to find everything you need at the savage website on their partfinder page.

  3. #3
    Paid Member
    Join Date
    Dec 2006
    Location
    Glenwood Arkansas
    Age
    59
    Posts
    465
    If your building on a 110 action you want a 30-06 bolt head not one for a .308. Short action and long action boltheads are different.

  4. #4
    Ah yes, you are right. But its not really a "308" bolt face, per se. What he needs to look for is simply a .473ish bolt face.

  5. #5
    Why do you need new parts? Was it a magnum? If not you should be set.

    If the existing stuff isn't in working order Midway has almost all of it in stock. Remember that a 243 has the same diameter head as an 06:

    http://www.midwayusa.com/product/461...06-springfield

    http://www.midwayusa.com/product/128...tainless-steel

    http://www.midwayusa.com/product/194...g-all-calibers

    http://www.midwayusa.com/product/444...g-all-calibers

    http://www.midwayusa.com/product/107...g-all-calibers

  6. #6
    Quote Originally Posted by efw View Post
    Why do you need new parts? Was it a magnum? If not you should be set.

    If the existing stuff isn't in working order Midway has almost all of it in stock. Remember that a 243 has the same diameter head as an 06:

    http://www.midwayusa.com/product/461...06-springfield

    http://www.midwayusa.com/product/128...tainless-steel

    http://www.midwayusa.com/product/194...g-all-calibers

    http://www.midwayusa.com/product/444...g-all-calibers

    http://www.midwayusa.com/product/107...g-all-calibers

    ^^^^^^That is everything you need. I ordered all of the above to change my 110 flat back from 7mm for my 260 project. 30-06 mag box and follower would be a good idea too.

    http://www.midwayusa.com/product/451...1-long-actions

    http://www.midwayusa.com/product/271...th-long-action

  7. #7
    If you need a barrel I will have a 243 barrel off a LRP. It gets out of jail on the 17th and will be switching to 260 so it will be unfired.

    See rule number 6. You need to read the rules before doing anymore posting here.

    http://www.savageshooters.com/showthread.php?104-Forum-Code-of-Conduct
    Last edited by Apache; 04-14-2013 at 08:05 PM.

  8. #8
    Paid Member
    Join Date
    Apr 2013
    Location
    tecumseh mo.
    Age
    71
    Posts
    3
    sorry about the misunderstanding,only looking for vendor sites,know about wws&wwb.anyway thanks for the info on midway site,some parts are on back orded.reason for replacement parts is,upon disassembly of a barreled reciever i bought locally,i found a verry thin crack about 3/8 long on thebolt face stub dirrectly in line with the ejector pin,any thoughts? iwould send pic.but havent figured it out yet. im new,69and notvery computer literet.also looking for rear baffel,this one is a little sloppy.very little wear on anything,but i think he stored it in a chicken coupe. thanks again

  9. #9
    Paid Member
    Join Date
    Jan 2010
    Location
    Frelsburg Tx
    Posts
    371
    30-06 and .308 bolt are the same the part behind it shortens it up and that's only if you shoot something like a .223 in a short action.

Similar Threads

  1. PTG Bolt body and bolt face
    By Neeltburn in forum 110-Series Bolt-Action Rifles
    Replies: 4
    Last Post: 07-09-2013, 03:31 AM
  2. Pre 66 barrel, bolt swap. can i switch pre 66 bolt face to modern bolt face?
    By Twodogs10mm in forum 110-Series Bolt-Action Rifles
    Replies: 7
    Last Post: 06-02-2012, 02:04 PM
  3. .439 bolt face
    By BigRyan in forum 110-Series Bolt-Action Rifles
    Replies: 6
    Last Post: 02-19-2012, 01:47 AM
  4. Stevens 200 bolt face onto a Sav 110E bolt?
    By USMarine1108 in forum 110-Series Bolt-Action Rifles
    Replies: 6
    Last Post: 10-16-2011, 01:54 PM
  5. Whats needed, Standard bolt face to SAUM bolt face.
    By jwv in forum 110-Series Bolt-Action Rifles
    Replies: 6
    Last Post: 08-31-2011, 11:12 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •