I am pretty sure... I will check my copy tonight.

I emailed and requested load data from them and they emailed me this:
Data for all grains are attached on the excel document. Tabs at the bottom will allow you to select the different grains.

Load data was generated using Quick Load a 24 inch barrel a COAL (cartridge over all length) of 2.800 inches and your COAL and velocity could be a little different.
AS WITH ALL RELOADING APPROACH THE MAXIMUM LOADS WITH CAUTION AS ALL RIFLES AND RELOADING TECHNIQUES WILL BE DIFFERENT. If YOU CHANGE ANY OF YOUR COMPONENTS; THIS INCLUDES DIFFERENT POWDER LOT NUMBERS; YOU MUST REFIGURE YOUR LOADS BY STARTING WITH THE MINIMUM LOAD.
If we can be of any additional help feel free to contact us.
Thanks for your interest and have a great day.

Walt Berger
Berger Bullets
Technical Advisor


When I received my copy of the manual it matches exactly.