Don't know where else to post it ??? Has anyone measured the height on his lug ? I noticed when I got my stock back on I had more barrel channel space. I first thought it was the difference in barrel dia. but they was the same. Didn't want to take it back off just to get that measurement. Thank's Dale
If you have more barrel channel space then it must be bottoming out in the stock. To be sure you'll have to take it out, put some clay in the lug area of the stock, and put the action back in to see if it is hitting.
No matter what the measurement is, youll still need to know if it is hitting.
”I have a very strict gun control policy: if there’s a gun around, I want to be in control of it.”
~Clint Eastwood
Thanks dog I'll try that. What if it is ? take some material out ?
yep. Easiest way is to use a dremel(carefully), and just make the pocket deeper. Be sure not to grind out the rear of the lug area of the stock, unless you plan on bedding it.
The aftermarket lugs are a little wider down the sides also, so it could be hitting there also.
”I have a very strict gun control policy: if there’s a gun around, I want to be in control of it.”
~Clint Eastwood
Members who have read this thread in the last 1 days: 0
Posting Permissions
Reply With Quote
Bookmarks