Hi all,
I have a 99 take down model in 22 HI power. I got the gun and it was in pretty rough shape. I have since completely disassembled it and now in the process of refurbishing it.

Here's my problem. I discovered the magazine (brass) is quite knicked up and the cartridge guide was bent. Obviously its been an issue from day one. I have throughly cleaned it and fixed the cartridge guide(which is cracked but is working) I can't get more than 3 shells into the magazine, when trying to put the 4 one in, it won't go around.

What I see is the third catridge is getting caught on the left side of the receiver and won't go into the brass rotor when trying to push the 4 cartridge. I think. Has any one seen/heard/experienced this problem?? Solution?? I was thinking of polishing/grinding some of the left side to get it from getting caught. Thoughts on this?