First off I'll just say that I'm a big fan of the Savage 10ml II. However, i could use some help with loads. I have a stainless MLII with synthetic stock. I've work pretty extensively with hornadys 250 gn xtp with short mmp sabot and sst with mmp hph12 sabots. I've used both 4759 and Vih N110. I've tried anywhere from about 42-45 gns 4759 and 42 gns n110. I have shot a few good groups with both if the barrel is clean. However, after about 3 shots accuracy is terrible even if barrel cools for hours. I've also drilled out breach plug, changed vent liners,etc... I hunt with about 7 other guys that shoot the savage and none experience what my gun does. I have noticed that my gun loads much easier than theirs. Theirs load very tight with the hph12 sabot while mine does not. They all shoot the 250 sst and all shoot around 45 gns of 4759. Anyone have any advice for other loads? One aspect of the savage was not having to clean the muzzleloader as often.