Results 1 to 9 of 9

Thread: .222 Rem 110

  1. #1
    New Member
    Join Date
    Oct 2012
    Posts
    13

    .222 Rem 110


    Hello All.

    I picked up a 110 in .222 Rem today. It has a dark wood stock similar to the 110 package guns, sling swivels and a blued barrel. Currently it has no sights, but it did. The rear sight is the one screw version.

    I spent a little time this evening checking old Shooters Bibles and Gun Digests from the '60's through early 2000's and cannot find any reference to a .222 being chambers in anything other that older model 112's and the 340's (I have a 340 in .222 also). The serial number begins as follows: E998XXX.

    Can anyone shed some light as to when the 110's were produced in the .222?

    Much thanks in advance.

    Tilghman

  2. #2
    JCalhoun
    Guest
    Interesting.

  3. #3
    New Member
    Join Date
    Mar 2008
    Location
    Missouri
    Posts
    6
    Can't say specifically about the 222 Rem chambering, but I believe that the 110V was only made from 1984-93, mostly in 22-250 and later in 223 Win (5.56). I guess it's conceivable that the 222 may have been a short run but could it have been rebarrelled at some point? I'd sure like to find one.

  4. #4
    New Member
    Join Date
    Oct 2012
    Posts
    13
    I considered a rebarrel as well. However, the barrel has the Savage script as on other Savage rifles. Perhaps, at some point Savage offered custom services.

    I plan to make a call to Savage today and hopefully get the low-down.

    Thanks

    Tilghman

  5. #5
    New Member
    Join Date
    Oct 2012
    Posts
    13
    Tried calling Savage today. After being on hold for 20 minutes, I gave up.

  6. #6
    JCalhoun
    Guest
    You want to send a PM to Maddog with the serial number and description.

  7. #7
    Basic Member
    Join Date
    Dec 2006
    Posts
    3,362
    Made in 1989.
    "As long as there's lead in the air....there's still hope.."

  8. #8
    Administrator J.Baker's Avatar
    Join Date
    Dec 2006
    Location
    NW Ohio
    Age
    49
    Posts
    6,491
    My guess would be that it was a custom order through the Custom Shop. In 1989 Savage was offering the .222 Rem in the Model 24's so making a 110 barrel with that chamber wouldn't have been an issue as they had the reamers and proof loads. Also, looking through the catalogs from 1986-1992 there's no Model 110 of any type or flavor that's offered with the .222 chamber as standard, and I can't ever recall seeing the .222 Rem available in the M110 line as a standard offering. It's most likely a 1-14" twist barrel as that's what was offered with the .223 back then.
    "Life' is tough. It's even tougher if you're stupid." ~ John Wayne
    “Under certain circumstances, 
urgent circumstances, desperate circumstances, profanity provides a relief denied even to prayer.” —Mark Twain

  9. #9
    New Member
    Join Date
    Oct 2012
    Posts
    13
    Many thanks for the replies, everyone.

    As I located more information I'll pass it along.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •