My Harris attaches to the sling swivel stud with a spring loaded clamp that has "****" on each end. These go through the hole were the sling swivel pin would normally go. Then you snug it with the set screw.
Very new to this forum and my new Savages. Never used a Bipod before. Bought a Harris cause I heard it was best but instructions are junk! Do I need an adapter to attach it to the TRR? I figured it just had a pin to go thru the front stud on the stock but no such luck!
Can someone wiser then me help?
My Harris attaches to the sling swivel stud with a spring loaded clamp that has "****" on each end. These go through the hole were the sling swivel pin would normally go. Then you snug it with the set screw.
What he said^*^
Photo:
Thanks for the pic!
Bookmarks