Quote Originally Posted by pitsnipe View Post
Bill,
Not to continue a hijack too much further but it looks spotless. Will try the cleaning with setting back to where it was.
Thanks!
Really its not off topic.

Anything that interferes with the sear to trigger engagement/reset can and will cause problems, Accu-Trigger or otherwise. "Looks spotless" only applies to what can be seen. In the case of a Savage there can be a buildup of gook between the sear, trigger housing and/or the sear pin.

Another common issue is sear bind. When the pin is installed sometimes it causes the "ears" of the sear to distort and "pinch" on the trigger housing. After installing the housings and sears, I use a pin punch to tap the ears outward then check to make sure it moves unrestricted and it's full range of travel.

Those my be a few of the reasons some have trouble with the ATs....Dunno!

Bill