Originally Posted by
germanhunter
That's true.
But the scenario I see, is a different one. I drive to the hunting area, the rifle is unloaded and decocked. Unloaded and unlocked, that's the way the rifle ideas stored.
Arriving I will move the safety to position (2), load the rifle and chamber one round. (This will keep the riffle uncocked at present, which is due to a male function.)
Before I climb up the live round is taken from the chamber and pushed down into the magazine.
On the high seat I will cycle one round into the chamber, again position (2).
De facto this leaves me with a chambered round and a uncocked firing pin.
Cycling the bolt with safety on position (2) should cock the firing pin. Am I right with this assumption?
Mental break down, here I come!
Bookmarks