Results 1 to 4 of 4

Thread: Feeding Issues Model 10 Predator Hunter Max 1 .223

  1. #1
    Basic Member SlimySquirrel's Avatar
    Join Date
    Jul 2009
    Posts
    281

    Feeding Issues Model 10 Predator Hunter Max 1 .223


    Hi guys,

    I have been loving the accuracy out of my Savage, shoots real nice with the Fiocchi SP 55Gr but it is having Feeding issues.

    Pretty Much refused to feed the Hollow Point Federal American Eagle Rounds and every now and then it shoves a round up too far when feeding.

    This is pretty Blimmin annoying as you can imagine. The Mag is in Tight, it's brand new and has not been stored with rounds in it...

    Anybody else suffer this same issue?

  2. #2
    Administrator J.Baker's Avatar
    Join Date
    Dec 2006
    Location
    NW Ohio
    Age
    49
    Posts
    6,491
    Let me guess...the tip of the bullet is hitting the face of the barrel right below the chamber hole. This is because they're hollow points and don't have that nice pointy or rounded tip to help guide them into the rather small chamber hole.

    The fix is to tweak the magazine feed lips with a pair of needle nose pliers so the nose of the round sits up a little higher. Common issue with the smaller 0.378" bodied cases (17 Rem, 204 Ruger, 223 Rem, etc) and HP bullets. Other option is to just not shoot hollow points. lol
    "Life' is tough. It's even tougher if you're stupid." ~ John Wayne
    “Under certain circumstances, 
urgent circumstances, desperate circumstances, profanity provides a relief denied even to prayer.” —Mark Twain

  3. #3
    Basic Member SlimySquirrel's Avatar
    Join Date
    Jul 2009
    Posts
    281
    Ha!
    I did try the Fiocchi but it still had the same issue but a little less say, 2 out of every 5.

    I'll give the mag a wee tweak...it's a proper pain in the @ss!!!

  4. #4
    Basic Member SlimySquirrel's Avatar
    Join Date
    Jul 2009
    Posts
    281
    I took to the Mag with a pair of pliers opening up the "Lips" a little to allow the rounds to sit a touch higher when being fed.

    Did a quick test last night of about 15 rounds floowed by a few more this morning and it performed flawlessly!

    Next to try the HP's and see if they are working also..would be good if they are as I have a good "Recipe" from a few members here!

Similar Threads

  1. New hog hunter 308 feeding issues
    By Steak n eggs in forum 110-Series Rifles
    Replies: 6
    Last Post: 02-25-2017, 09:14 AM
  2. Model 10 FCP-SR 308 feeding issues
    By shane431 in forum 110-Series Rifles
    Replies: 9
    Last Post: 12-14-2015, 11:24 PM
  3. model 11 lrh 300wsm feeding issues
    By walknstalk in forum 110-Series Rifles
    Replies: 1
    Last Post: 02-06-2015, 08:17 PM
  4. Mark I/II/93R: Model 93 feeding issues? You can thank me later.
    By bflee in forum Savage & Stevens Rimfire Rifles
    Replies: 1
    Last Post: 10-25-2013, 07:28 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •