Now it should be snug.
Tanks Dean
I have a 110 30-06 and new to savage rifles. Should the rear baffle assembly on the bolt be loose, and if I take the bolt out of the gun i can rotate it. Is this normal?
Now it should be snug.
Tanks Dean
It will rotate
Sorry for some reason I thought you meant the bolt, AKA as the BAS, there is a notch to line it up though.
I have one that'll fall off if I don't watch it. The others are snug enough to stay put. Also, when I clean & lubricate the bolt I put a mini-drop of oil in the hole where you can see the steel ball. Dip the end of a toothpic in oil & touch it to the steel ball.
If it's very loose keep an ey on it. You know it'll fall off when you don't need it to or want it to.
'Scuse me while I whip this out...!
Hey Frank it's not worth ruining your day for a $10.00 cause it fell off somewhere without you noticing it, here you go.
https://store.savagearms.com/partfinder/ you can put in your serial # but there all the same, it's number 128 on the exploded view.
Tanks Dean
Last edited by scope eye; 12-09-2012 at 07:07 AM. Reason: spellink
Bookmarks