Results 1 to 4 of 4

Thread: leupold fixed 4x on quick release rings - What base for stevens 200 in 308?

  1. #1
    Basic Member
    Join Date
    Mar 2007
    Age
    74
    Posts
    16

    leupold fixed 4x on quick release rings - What base for stevens 200 in 308?


    I just ordered a Stevens 200 in 308. The plan is to use it as is for the upcoming deer season, then do a complete makeover after. T&T action, new stock (might actually do that right away), custom barrel, Rifle Basix trigger.

    I bought a Leupold fixed 4x on quick release rings off of ebay a number of years back that I will use. Maybe I will change the rings out for something better after hunting season, don't know yet. I am quite ignorant and inexperienced when it comes to rifle optics and mounting. I bought a Remington BDL in SS back in 1992 in 270 Win. I put a Leupold VariX II 3-9 with a 50mm OL. I was always frustrated because I couldn't get the scope back far enough for proper eye relief. Now I see that I bought the wrong mount for it, but I didn't know anything and just went with it. Just to illustrate how little I knew until the last few days when I started poking around on the net about gun optics.

    Anyway, I live in central New York now and I very much doubt if I'll ever get a shot at 200 yards, and probably hardly ever over 100. I just want a nice hunting rifle that I enjoy shooting.

    So what would be a decent scope base to use and be sure that I have enough eye relief adjustment? I would rather go with something on the inexpensive side in case I switch out different type rings after the season.

    Suggestions? Thanks for any help!

  2. #2
    thomae
    Guest
    For what you want, I would recommend the Weaver 1 piece Multi Slot Tactical Weaver-Style Base for Savage 110 Series Long Action Round Rear, Matte.
    It is inexpensive, and has lots of room for eye relief adjustment.

    http://www.midwayusa.com/product/532016

  3. #3
    Basic Member
    Join Date
    Mar 2007
    Age
    74
    Posts
    16
    Will this still fit the short action? There is one for a short action. I don't know if the mounting holes are the same on both actions. Thanks for the link!

  4. #4
    thomae
    Guest
    Sorry, I thought you had a long action. Wasn't thinking. For short action, Here are your choices in weaver bases. Just remember to shorten the screws if you need to.
    http://www.midwayusa.com/product/315941
    or
    http://www.midwayusa.com/product/735142
    or
    http://www.midwayusa.com/product/973274

Similar Threads

  1. Leupold 1" Quick-Release rings and bases on a model 10/12?
    By barrel-nut in forum 110-Series Rifles
    Replies: 0
    Last Post: 02-07-2016, 03:03 PM
  2. quick release rings?
    By wal0001 in forum 110-Series Rifles
    Replies: 12
    Last Post: 12-01-2015, 09:50 AM
  3. Leupold STD 1 piece base and rings.
    By 1983Weatherby in forum Optics
    Replies: 2
    Last Post: 08-03-2013, 05:38 PM
  4. Quick Release Rings, and Pic base
    By 319 in forum Optics
    Replies: 3
    Last Post: 01-13-2010, 10:50 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •