Bedding an Axis Rifle

[fla9-40]

Hello HANDYANDY and WELCOME to the forum!

The CF2 rifle stock is a very close fit but you will have to hog out some wood. If you don't have them already, get yourself some SHARP chisels, a good rotary drill, and some sand paper and TAKE YOUR TIME and you will be OK. Be sure to get the one with the adjustable pad or you will have to find something to add on to the butt.
I'm going to order me another one with the adjustable pad for my .308 and that will give me more time to work on the Walnut slab I have that is just that, a slab of wood!

[Gmac5]

Fla9-40 If you order another check out PARKER HALE M-82 sniper rifle butt spacers , they are cheap ,a little smaller than what you have ,but the stock can be made to fit the BSA CF-2
YES I have used aluminum, fancy wood inlays, steel,plastic , and have also just shaved it down flush.
As far as triger guards , again gun parts corp has many to choose from .the as cast aluninum needs a little work but looks good finished
HOPE THIS HELPS GARY