Hi,
I have an savage 112 in 22-250 Long action with a 26" bull barrel, and I have 2 Stevens 200 CF short actions a 243 an a 308.
I was needing a long action for a 270 a&b barrel I picked up on this site, and also wanted to eventualy do a 257 rbrts project rebarrel, that I had planned on needing a long action when I get a barrel.
What would I need to do with the LA 22-250, for either the 270 or 257 rbrts.
I would need to swap out the bolt head, would I not ?
Then, I wanted to place the 22-250 bull barrel onto on of my short actions, thus haveing a "new" short action 22-250. If I had to swap bolt heads for the 270, I would then have the old bolt head to go along with the old 22-250 bull barrel. The old 22-250 was a stagger feed, and the "new" short action would have to be a CF or a single shot, it is after all really a bench rifle with the 26" bull barrel, so a single shot is no big deal to me.
I have an action wrench, and nut wrench, and I have swapped out 3 other barrels, but they were barrel swaps using the same parent cartridge, 22-250 to 250 savage, and 25-06 to 338-06.
Any help would be great.
Thanks