That is really cool! I love it.
stock came on the big brown truck today!! everything is here now. below are the components with pictures and info.
the donor action is a SS large shank striker with a rifle basix SAV-2 trigger installed.
the barrel is a Krieger SS 9 twist #8 standard target
using center shot rifles Muscle brake
(need to take picture still)
Reamer and go gauge from PTG and recoil lug from SSS
ordered the stock inleted for AICS mags, this one is from
accuratemag
the stock is from XLR industries. Kyle and I went back and forth for a bit till I finally jumped in. took a bit longer than expected but it was well work it. these pics have my 6BRX barrel action in it until tomorrow.
there are some more pics on my photobucket account.
tomorrow the barrel should be threaded and chambered then installed, followed by threading for the brake.
That is really cool! I love it.
Are you tax diversified?
AWESOME!
.223 Rem AI, .22-250 AI, .220 Swift AI .243 Win AI, .6mm Rem AI, .257 Rob AI, .25-06 AI, 6.5x300wsm .30-06 AI, .270 STW, 7mm STW, 28 nosler, .416 Taylor
Thanks guys. Forgot to mention it will be a 7WSM
That's a handfull of sweetness.
A good wife and a steady job has ruined many a great hunter.
This is a route I have been considering lately, but had an issue with finding an existing striker or making one from a new, unassembled receiver....
I am hoping/assuming that by using a new, unassembled action, that you are "manufacturing" a pistol with what would commonly be a rifle action?
Are any of the existing new target actions matches to the Striker action? Same mounting bolt locations, etc?
Eventually I'd like to make a 300 blackout pistol with about a 10-12" barrel but I'm still weighing my options when it comes to actions.....
Thanks for any advice or pointers, in advance!
SC
"Dum spiro, spero" - While I breathe, I hope.
No, from the pics, I'd say he is starting with a Striker action, right port, left bolt, kind of distinctive. Always a pistol.
But you can start with an undesignated target action and make a pistol. BUT, their not available in left bolt.
Larry
Tinkerer
thats correct its a striker. shoots very well at that. I was getting roughly 1.25" 200 yard groups with the same load as my rifle. both barrels were cut with the same reamer. i was looking forward to load development but oh well
I was wondering when someone would do this?
Very nice! I never thought to have XLR make a Striker stock. Good job thinking outside the box!
Andrew
Sorry, the poor man in me must ask.
How much?
Larry
Tinkerer
Are you tax diversified?
Larry, SP is trying to put together a group buy. Check in over there for a price.
.223 Rem AI, .22-250 AI, .220 Swift AI .243 Win AI, .6mm Rem AI, .257 Rob AI, .25-06 AI, 6.5x300wsm .30-06 AI, .270 STW, 7mm STW, 28 nosler, .416 Taylor
Any final pics of this??
Gotta say that the stock is awesome as a pistol stock.... I like it!
Good thinking on your part.
”I have a very strict gun control policy: if there’s a gun around, I want to be in control of it.”
~Clint Eastwood
the steel still needs coated. im up in the air on what product and color
I like it! I have an XLR rifle stock which has worked well for me, now I may need to look into getting one for the Striker as well.
Andrew
That is awesome!!!! Very nice build.
”I have a very strict gun control policy: if there’s a gun around, I want to be in control of it.”
~Clint Eastwood
This may be a stupid question but is the Striker action Centerfeed Stagger feed or it's own bolt spacing?
Striker action is left bolt/right port, staggerfeed, blind magazine on a 4.275" bolt spacing, the old Savage short action. 510 is CM, 516 is SS. No sights, drilled for scope base, flat rear , round front.
BTWE, I'm looking for a 510 in 308 bolt size if anyone has one?
Larry
Tinkerer
Last edited by tinkerer; 07-08-2012 at 11:28 AM.
Larry, your pm inbox is full and your email address is missing, may have something for you.
Last edited by Appleseed; 07-09-2012 at 06:13 PM.
PM/call me. Inbox cleaned out.
Larry
Wished you guys hadn't posted all this , it shoved me over the edge , ordered one for my Striker today . See you in Sept.
Youll like it! What one a single shot or mag inlet?
Mag inlet
what caliber?
Bookmarks