[quote=justin1098 ]
Looking at the pillars that are in there, I see that they are very thin and the first 2 contact the action and the rear is really close maybe .010-.030 below.

I have never worked with the target action with 3 screws.......however........I would think you would want all the piller to touch the action. It seems to me as if you would put stress on the action if all the pillars did not touch the action. As was said, the pillars are there to keep from compressing the stock material.

You have some excellent replys from knowledgeable people and nobody mentioned this.........I may be missing something.

Bill