Welcome to the "Brotherhood of the Barrel Nut". As far as headspacing your barrel, I would use at least a GO gauge to set the HS and put two pieces of Scoth brand tape on the gauge to make it a NO GO gauge. A second method would be a piece of brass trimmed to proper length, again using the tape as a NO GO.Originally Posted by srt-4_uk
The centerfeed magazine can be bedded in a staggerfeed stock it just required aligning the magazine so it feeds properly and wedging it in place or bedding it in epoxy if you want it permanent. As you've discovered, there's not a lot of choices for a long action. There have been a number of discussions about that in the forums but will require a search in past entries.
Bookmarks