Thanks "too many Savages" for the above detailed post, that't the info I look for in this forum!

For peak accuracy, it is a good idea to re-crown the barrel every 400-500 rounds.
I found the above statement very interesting

Bore-Tech Eliminator, Wipe-Out, Foam cleaner and pre-cleaner
I read the entrire artricle http://www.accurateshooter.com/technical-articles/barrel-cleaning-debate/
 and it's was very interesting, all of it. The two products above came up a lot with several shooters!

All I do can do is advise everyone to read this articles and make their own decesion.

I personally will use patches, good bore guides, and solvents more than brushes in the future as per all the articles!

Again, very interesting read, especially the differences between short and long range shooters!