Results 1 to 5 of 5

Thread: Asking Out of Ignorance: Need Help With EGW Mount

  1. #1
    Basic Member Vartarg's Avatar
    Join Date
    Feb 2012
    Posts
    45

    Asking Out of Ignorance: Need Help With EGW Mount


    I bought my first Savage...it's an F Class 6mm BR.....and a one piece EGW 20MOA picatinny mount rail.

    There's a high end, and a low end...which goes forward, toward the muzzle?

    Thanks


  2. #2
    Team Savage
    Join Date
    Feb 2010
    Location
    Kennedy Meadows,CA.
    Age
    73
    Posts
    4,788

    Re: Asking Out of Ignorance: Need Help With EGW Mount

    slope goes forward
    drybean

  3. #3
    Basic Member
    Join Date
    May 2010
    Age
    76
    Posts
    342

    Re: Asking Out of Ignorance: Need Help With EGW Mount

    everyone has to learn, I have the same gun and same base, my F class was really loose in the stock if you can take out action bolts and just lift barreled action out thats how mine was but it still shot good, so most all stocks need to be bedded and especially if your going to shoot f class.

  4. #4
    Basic Member barrel-nut's Avatar
    Join Date
    Dec 2010
    Age
    53
    Posts
    1,067

    Re: Asking Out of Ignorance: Need Help With EGW Mount

    Quote Originally Posted by drybean
    slope goes forward
    drybean
    That's correct; low end forward.

  5. #5
    42769vette
    Guest

    Re: Asking Out of Ignorance: Need Help With EGW Mount

    just so you know why the low end goes forward

    on a 20 moa the goal is to have you initial zero in the upper portian of the scope. this allows more room to make the crosshairs to go down causeing the bullet to go up. that way for can dial more "bullet up" to compentate for longer range shots. in a perfect world if your scope has 80 moa of travel with a 0 moa base you would have 40 "bullet up" and 40 bullet down" with a 20 moa base you and the same set up you would have 60 "bullet up" and 20 "bullet down"

Similar Threads

  1. Replies: 4
    Last Post: 03-17-2015, 04:45 AM
  2. Replies: 2
    Last Post: 08-20-2013, 11:08 PM
  3. need some help with a mount
    By HorryGunner in forum Optics
    Replies: 9
    Last Post: 08-19-2012, 11:07 AM
  4. Excuse my ignorance
    By revbc in forum 110-Series Rifles
    Replies: 11
    Last Post: 06-07-2010, 08:28 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •