I purchased my 110 in .338 Lapua and 2 boxes of Hornady before I found the thread describing the Hornady brass issue. That’s 120 dollars down the drain and a very disappointing first trip to the range. Second trip went better rifle seemed very accurate but I was having scope zeroing issues. Third trip went very well and the rifle is very accurate. From an inexpensive rest at 100 yds I was able to get three shot groups that were grouping well under an inch with 250 grain HSM loaded boat tails. Out at 300 yds I was able to keep three shot groups under 4 inches, which I know is shooter issue. I still have less than 35 rounds through the rifle. I must say I am pretty pleased thus far. For what I have invested so far she is shooting very well.