Results 1 to 12 of 12

Thread: First build 110 25-06

  1. #1
    deerhunter85
    Guest

    First build 110 25-06


    I'm building my first savage it's going to be a shilen with a brake in a hb ss but don't know what lenght to order for it whating to shot *90 smkhp and 100nosbt maybe 117sst but need to know what lenght tube and what twist

    Thanks for the help
    Dan B
    Ps it going to be a long range yote and deer gun but love to shot paper

  2. #2
    deerhunter85
    Guest

    Re: First build 110 25-06

    It getting a shilen brake to would like to have 26"-3

  3. #3
    Grit #1
    Guest

    Re: First build 110 25-06

    1 in 10 twist is standard. Works wwith everything from 87gr to 120gr 26" would be the max I would go. Mine is 24" and throws the 120 at 3100 with a healthy dose of 4831. A brake in not needed. the cartridge doesn't kick that hard.
    Best regards,
    Grit

  4. #4
    Basic Member
    Join Date
    Jul 2009
    Location
    Johnson County,Tx
    Posts
    569

    Re: First build 110 25-06

    Like others have said,No brake needed on a 25/06.
    1-10 twist 24 or 26" long will do you well.I like a varmint or bull contour barrel on the 25/06,the barrel will get hot very quick if it's thin.

  5. #5
    deerhunter85
    Guest

    Re: First build 110 25-06

    I just want the brake but 26" tube is what I thought would be wright just wonder way they put 30" barrels on the 308 for 1000yd br

  6. #6
    stangfish
    Guest

    Re: First build 110 25-06

    Hey Dan, Those heavy long barrels add a lot of weight and make it difficult to carry. The guys using the 30 inch barrls are usually bagged in or on a bipod and often use $1500 + scopes with an app to dope wind and elevation. You could probably do everything you wanted with a heavy magnum contour at 24".


    Good luck
    Fish

    P.S. Sometimes I read what I have written before I hit the post button, sometimes not and that is when you see that I have edited what I written.

  7. #7
    Basic Member
    Join Date
    Oct 2011
    Age
    36
    Posts
    158

    Re: First build 110 25-06

    Hey! My second build was a .25-06. Mine is a 24" McGowen 1-10 twist in a octagon sporter contour. I love it! it will shoot 100gr sierra and 100gr speer bullets at 3300 fps into about a half inch group at 100 yds. I know its good enough to hit a milk jug at 550 . one nice thing about the break is you will be able to control the muzzle jump...but on the other hand it will make it quite long if your going with the 26". My other half has a 300 Ultra with a 26" tube and a break....It makes it awkward to get it out fast and makes it a pain for standard scabbards. But it does work! It feels like it kicks less than my 8lb 06 mentioned above! Anyways hope this helps! Good Luck!
    Henry.

  8. #8
    Cycler
    Guest

    Re: First build 110 25-06

    If you value your hearing and that of those around you, dispense with the brake.

  9. #9
    Basic Member scope eye's Avatar
    Join Date
    May 2008
    Location
    Sebring FL
    Posts
    2,795

    Re: First build 110 25-06

    My 26 inch 12 twist Mcgowan sends 75gr Vmax's to 4000 fps plus no brake needed, I do have limb savers on everything I shoot even the short actions I like the feel, btw It takes 62 gr of H4350 or 53gr Varget to get to that velocity.
    Thanks Dean
    RUMs are like woman in Stiletto heals, you know they are going to put you in the poor house, but that has never stopped anyone from pursuing them.

  10. #10
    cwop
    Guest

    Re: First build 110 25-06

    henry

    i would like to see a picture of you 25/06

    bob

  11. #11
    Basic Member
    Join Date
    Aug 2010
    Location
    Glenwood, AR
    Age
    41
    Posts
    172

    Re: First build 110 25-06

    If you can get ahold of HAMMER he can tell you who be uses to make his 40" barrels and all the parts to screw them together to make a 80" ;D
    Silence is golden.... duct tape is silver!!

  12. #12
    deerhunter85
    Guest

    Re: First build 110 25-06

    I would like to see more pic of savage also

    It's getting the brake becuase it makes it easy to see the vapertrail ween shooting by your self and I just like them they look bad ass lol

Similar Threads

  1. 20 VT build... Which rifle to build on?
    By sgt_jamez in forum 110-Series Rifles
    Replies: 2
    Last Post: 11-11-2013, 09:57 PM
  2. Replies: 12
    Last Post: 11-09-2012, 02:58 AM

Members who have read this thread in the last 1 days: 0

There are no members to list at the moment.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •