Reply With Quote
No machining should be required, headspace it and tighten it down
Mike
Okay, new to the Savage line. Have a 1991 110 in .30-06. I want to replace the recoil lug with a thicker lug and have ordered pillars from Stocky's. With the barrel nut setup, will the barrel likely require machining, or can the headspace on these just be set with a "Go-Gauge" and then tightened into position? I already have all applicable wrenches. Thanks so much for the info.
No machining should be required, headspace it and tighten it down
Mike
+1 for nova1194. Brian Brown.
+2, just that easy.Originally Posted by fullersson
Vietnam Vet, Jun 66 - Dec 67
Members who have read this thread in the last 1 days: 0
Posting Permissions
Bookmarks