Guys,

I apologize for the very basic question, but I am new to the issue and have not used the site much. My rifle is a basic barrel nut Savage in .308. A 1:10 twist, 22" heavy sporter Douglas bbl has been swapped in. The rifle has an accu-trigger and sits in a Brownell's synthetic stock. I need to pull the barrel to send it out to be threaded, then reinstall it.

Will someone please point me to a good explanation of the process and tools required to do that job, please.

(A barrel vise and a Mauser action wrench is available, and I can make a new top for the wrench if needed.)

Thank you!