Below is a picture of my 6brx brass, last 8 shots. It's being shot out of a Savage PTA RBRP. 7 Remmy 7 1/2's and one CCI 450 primer.

This started slowly, and as you can see the last 8 are not normal, I also had 3 misfires. I put three pieces of masking tape on the end of new brass before the bolt wouldn't close!

Could this be caused by a head clearance issue?

I have taken the bolt assembly apart and didn't find anything abnormal!


[img width=580 height=435]http://i957.photobucket.com/albums/ae56/Dennis4437/8roundsBRX.jpg[/img]