So I had my rifle (Savage 111 in .308 with a sporter barrel and synthetic stock) sighted in with Remington Core Lokt 155gr rounds. I loaded some ammo and shot it from the bench, no vise or anything just off a bipod. Everything is CCI primer and Remington 150gr SP bullets. Targets were set at 100 yards with calm winds and about 75 degree ambient temp.

This target is H4895, the left is 43gr and the right is 41.2gr. Each time I was aiming for the bull of the TOP target.
[img width=253 height=450]http://i917.photobucket.com/albums/ad20/Bottlerocket91/2011-09-09_11-25-28_189.jpg[/img]

This target is Varget, Left is 42.6gr (the X'd holes are the left group) and the right is 40.4gr. Again I was aiming for the bull of the top target on each.
[img width=253 height=450]http://i917.photobucket.com/albums/ad20/Bottlerocket91/2011-09-09_11-25-59_474.jpg[/img]

Any input? I know these wont shoot exactly like the factory ammo, but I didn't think the groups would be this spread out or this low compared to factory.