Results 1 to 5 of 5

Thread: Lap 260 Rem brass

  1. 08-29-2011, 08:15 AM #1
    blom
    Guest

    Lap 260 Rem brass


    Has anyone tried the Lap 260 brass? I'm curious about what the neck thickness is and how concentric they are.
    Thanks
    Reply With Quote Reply With Quote
  3. 08-29-2011, 09:19 AM #2
    BoilerUP
    Status
    Offline
    Basic Member BoilerUP's Avatar
    Join Date
    Nov 2010
    Location
    Floyd Co, IN
    Age
    40
    Posts
    1,100

    Re: Lap 260 Rem brass

    Reports over on Sniper's Hide that some folks with tight-necked chambers had to neck-turn Lapua 260 brass in order to fit.
    Reply With Quote Reply With Quote
  4. 08-30-2011, 06:15 AM #3
    blom
    Guest

    Re: Lap 260 Rem brass

    Thats what I'm hoping for, I have a sammi spec chamber and after I take the high spots off on the Nosler 260 or win 7-08 ( necked down ) the necks are sloppier than I like.
    Thanks
    Hope to hear from someone who has actual measurements.
    Reply With Quote Reply With Quote
  5. 08-30-2011, 07:41 AM #4
    BoilerUP
    Status
    Offline
    Basic Member BoilerUP's Avatar
    Join Date
    Nov 2010
    Location
    Floyd Co, IN
    Age
    40
    Posts
    1,100

    Re: Lap 260 Rem brass

    http://www.snipershide.com/forum/ubb...Number=2277512
    Reply With Quote Reply With Quote
  6. 09-01-2011, 08:15 AM #5
    blom
    Guest

    Re: Lap 260 Rem brass

    Thanks Boiler Up
    That's what I needed to know
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Some questions on Brass & Zinc Bulletson a CNC lathe I made a Brass one but are they
    By ClassicCannons in forum 110-Series Rifles
    Replies: 23
    Last Post: 04-27-2014, 05:25 PM
  2. Need 25-06 Brass... can I size down 30-06 brass?
    By petrey10 in forum Ammunition & Reloading
    Replies: 12
    Last Post: 03-20-2011, 06:51 AM
  3. just letting ya'll know i found 204 ruger brass mixed in with the 223 brass
    By lal357 in forum Ammunition & Reloading
    Replies: 4
    Last Post: 06-09-2010, 10:03 PM

Members who have read this thread in the last 1 days: 0

There are no members to list at the moment.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules