Yup, done many of them. I have always just droped them in without any problem.Originally Posted by gotcha
The picture should look exactly like your trigger hanger, because the Stevens uses the old Savage style hanger. What you may be referring to is the picture of the accu-trigger hanger bracket, that had to be cut away for the older style SSS trigger to fit through. See the little bumps on the back of the trigger they are legs, and sit on top of the trigger bracket, then align the hole, and place the screw in. Remember that the screw hole will not perfectly align, this was done on purpose, just as long as you can get the screw through it is all that matters.
Bookmarks