1 in 9 1/2 twist,as to 1 in 10?

**willyp** · 06-26-2011, 08:06 AM

Why did Savage go to the 1 in 9.5 twist,in the 243 cal?

**Dennis** · 06-26-2011, 08:16 AM

I can't answere the question, but I own one. It's a tack driver!

**BoilerUP** · 06-26-2011, 12:49 PM

Better stabilize heavier bullets?

**tammons** · 06-26-2011, 12:59 PM

1/2 twist wont do much.

I would guess something in manufacturing.

**BoilerUP** · 06-26-2011, 01:02 PM

Originally Posted by tammons

1/2 twist wont do much.

Maybe not, but I seem to recall reading some folks were having trouble with getting 100gr bullets common in factory hunting ammo to consistently stabilize in 10-twist 243s; that extra half-inch might take the inconsistency away.

Presuming there is a cost involved with a manufacturing change, I'm not sure why they would change from one twist to another without a good reason (the 7mm08 twist debacle notwithstanding).