I started my test with the Superformance. Started at 42grs to 43.5 in 1/2gr increments. MV started from 2822 to 2977 from a 22" barrel. 43grs is the max as pressure signs on the primer showed up on the 43.5. The best group was the 42 and 42.5 and will be somewhere between the two. Problem is horizontal stringing. The bullet is seated .010 off the lands. Regardless of the loads, at least one bullet will the cut the 1/4" bulls eye. All groups are around one inch. The barrel is floating fine, just wondering about the 3 stock screws. Is there a particular order you should use to tighten these screw and what torque should be used. Inch pounds?? Savage model 11.
Thanks