Printable View
there's 3 guns shows coming at the end of the month i'm going to be looking for model 110's in 223 - 308 - and 30-06 are the any of these that are better or worse as far as what year they were made are there any to avoid. also whats the best resorse for dating a savage 110. thanks for any help you can give
All Savages are bad, if you run across any, send them to me and I will properly dispose of them for you. If not properly handled they can be the most addictive thing you will ever come across. ;)
There is an article in the FAQ section here on dating. Really the only one to watch is the 1st gen short actions with the 4.52" screw spacing. You can build off of them, but finding aftermarket stocks is a very limited proposition.
in reading a thread that mad dog posted in I think he said in 1969 they started the letters in the serial no. if so my 30-06 starts with F followed by 6 digits think that puts it at 1974. i'm just trying to get a ball park idea cause I know there was a period of time when savage made some real stinkers and as much as I like savage I would like to avoid these
thanks boots but i'm afraid I've all ready got the savage little monkey on my back i'll check the faq's .
could not find faq article on dates just series and letter info
Guess you didn't look to hard...Quote:
Originally Posted by dey59
http://www.savageshooters.com/conten...Firearm-Dating
I still don't know how you got there I clicked every link in faq and could not find it other than your link . but thank you that will help a great deal
Its not one that's the problem, its when all his little buddys insist on jumping on...Then feeding all there greedy little mouths...Quote:
Originally Posted by dey59
Click the Savage FAQ's button at the top of the page (blue button)Quote:
Originally Posted by dey59
Scroll down to the bottom where the page list is and click on #2
On page two it's the second article down in the left-hand column.
Easy-Peasy! :thumb:
yup I didn't go down far enough. theres a whole bunch more good stuff. thanks
As far as spotting "bad" Savages stay away from the the rifles with built-in Weaver style bases. They were silver soldered on at the factory and the bases were not aligned well. I am not positive but think they were from the late 80's. The visual cue is no screw heads on the bases.
Will he be able to see the base screws if rings and/or scope is mounted? Paul :confused:
I would avoid anything with an "E" prefix like the plaque.
Mr. Fred, any additional reasons other than limited choices of stocks for 4.522" action screw spacing?Quote:
Originally Posted by sharpshooter
Sure if he opens the bolt and looks at the underside of the receiver bridge. Also the bases will be the exact same color as the receiver since they are finished as one piece. Weaver bases are aluminum and wont match.Quote:
Originally Posted by scpaul
If it started with an F it was made in the 90's.
Could I get some clarification on why serial numbers starting with E should be avoided?
+1, I'd like to know too, I have and "E" serial numbered action.Quote:
Originally Posted by skamondongo
IIRC, Fred mentioned it in another post. But as memory serves, the E prefix actions were made during the "bankruptcy" years of Savage and the QC was not very good at all. The flat rears were often not even close to true, loose raceways, crappy threads, misaligned base screw holes, etc., etc.
I could be wrong, but that's what I remember being stated. I had a 110 in 223 on a LA with he short mag well and the flat rear looked like a guy with an angle grinder ground it on there. bedding the bases cured it, but still.....
In the same era that had a run of cast actions that also had integral weaver bases. Another bad idea.Quote:
Originally Posted by Ralfus
I know nothing of the new production Savages but the previous owners from 1995-2014 made some very accurate rifles and were responsible for Savages reputation for Accuracy. G is a good prefix to own.