Was wandering what do you think is the better uniformer out there?
I was looking at the K&M tool, the Sinclair tool, the possum hollow and Holland tool(both of these have Large and small uniformer in same tool)
Printable View
Was wandering what do you think is the better uniformer out there?
I was looking at the K&M tool, the Sinclair tool, the possum hollow and Holland tool(both of these have Large and small uniformer in same tool)
can not say witch one is the best,but my K&M works great
drybean
I can not say which one is the best,but my Sinclair tool works great.
There are two separate bits: one for small primer pockets and one for large primer pockets.
The bits are made of solid Tungston Carbide, so they should never really wear out.
I don't use the "screwdriver" handle that comes with the kit. Instead, I chuck the appropriate bit into my mini lathe and simply push the brass onto the bit until it stops cutting.
Sometimes my hand gets sore after several hundred rounds, but I usually only uniform the primer pocket the first time I prep brass. After that, I use a primer pocket cleaner as necessary.
It is fast and easy. I recommend it highly.
I have posum hollow and it works great, I have a russ hayden and I dont like it as much. Skip Otto machine is the best out there but Skip Otto passed away a few years ago, and there is not new ones being made.
will the possum hollow easily chuck into a drill?