I just ordered the EGW axis scope mount. How do I remove the factory one piece mount?
Printable View
I just ordered the EGW axis scope mount. How do I remove the factory one piece mount?
Are there not four screws holding it down?
the one piece base and rings that came on the gun. It looks like there is one screw in the front of the base. At the rear of the mount there is a hole for a screw, but it's something like a rivet. When I bought the gun last year, the gun shop told me that I would have to cut off the factory mount. I will try to see if I can get some pics.
Is it an Axis or an Edge?
The Edge is the older model Axis.
It's an axis. It has 2 screw holes in the mount.
It's hard to take good pics. The one in front has a screw, but the hole in the back does not; it appears to be something like a rivet.
Ok, so there are a total of 4 holes under that mount? So if I some how mess the last hole I will be ok. Since the egw mount is one solid piece. I am wanting to mount a 50mm scope. This 40mm Nikon is a good scope, but my 50mm Nikon on my 35 whelen is much better late in the evening.
It would help if you took off the current scope since you have to do it anyway.
I am going to finish out the last 2 weeks of rifle (deer season) in Mississippi. I can see the screw in the front, but that's not a screw in the back. I have a strong feeling I will have to cut off the mount. If It was something simple I would remove the scope. I now know that's not the factory mount.
Well it's been a rough year hunting. I have missed the largest deer I have seen while hunting last week. I sighted my gun and got it back on target. Yesterday evening I missed another deer; I have missed 6 deer with this gun. I was going to wait until after deer season, but I got to get my gun fixed. There were no screws in the front two holes of the mount. The rear screw had been ground down for some reason. The front mount appears to have been rubber cemented. I am pissed.
Just me , but first thing i would do is have a real serious talk with the man that sold me the rifle/scope pkg. the next option is find a reliable gunsmith and have the screws/rivets whatever drilled out and the threads chased/repaired and have the proper base of your choice installed.
The gun was sold as new with a factory mount.... I had to clean out the front two holes the best I could. I am hunting on public land out of a ground blind. I thought it was a combination of range and me not having a good prop to shoot from. I have never mounted a scope, and have always had my gun shop do the mount and bore sight for me. I have never had an issue until now. I guess that I am getting ready to learn.
http://i32.photobucket.com/albums/d2...EFBE7D7846.jpg
http://i32.photobucket.com/albums/d2...EFB4791A6E.jpg
http://i32.photobucket.com/albums/d2...EFA9CFC3E1.jpg
I like the weaver rings better. The EGW rail is a nice setup also, and looks good as well. This is my first time to mount a scope. I used loctite on all the screws. I used a laser bore sight to adjust the scope. I hope to shoot it tomorrow, & finish out the rest of rifle season without anymore issues.
It appears to me that the Ded nutz mount is for a long action, that's why there are no screws in the front. I don't know for sure, but I'll bet that Ded Nutz doesn't even make a base for an Axis.
DNZ does make a one piece mount for the Axis, but I wonder if the original owner bought the correct mount.Quote:
Originally Posted by Gmac5
They do - in three heights and two different colors. http://www.dnzproducts.com/game-reap...e-axis-or-edge
Previous two posts split into their own thread which can be found here: http://www.savageshooters.com/showth...ght-in-Problem