Model 12 308 to 7.62x39

[Dave Hoback]

Need to use a spacer in the longer 308 mag. Same as if you running a 223 in the 308 mag.

[nathantc]

Need to use a spacer in the longer 308 mag. Same as if you running a 223 in the 308 mag.
in the staggered feed blind mag i found that the shape of the 7.62x39 would not feed even if that was there without other modifications. The part that acts as feed lips ends to soon making the rounds want to tip up to soon or flat out nose dive. Im sure work could be done to correct this, but i personally chose to just stick to a detachable box mag as they are easier to make work without changing the rifle its self.

[mattri]

https://i.postimg.cc/0rb5dRHY/Screenshot-2021-09-08-16-20-57.png (https://postimg.cc/0rb5dRHY)

Hogue uses a reversible pillar on their stocks so they can be used with either 4.27 or 4.4 action spacing.

Any reason you couldn't use one of their dbm stocks, flip the pillar so it fits the stagger feed spacing and run it with dbms?

[nathantc]

https://i.postimg.cc/0rb5dRHY/Screenshot-2021-09-08-16-20-57.png (https://postimg.cc/0rb5dRHY)

Hogue uses a reversible pillar on their stocks so they can be used with either 4.27 or 4.4 action spacing.

Any reason you couldn't use one of their dbm stocks, flip the pillar so it fits the stagger feed spacing and run it with dbms?

i believe a feed ramp change is required and some inletting on the action to do that.

[mattri]

Hmm, might be worth looking into.