Broken Axis magazines

[mjadams61]

Has anyone broken the clip yet that holds the axis mag in place? I just bought the axis .308 today and was checking it out and notice the way the mag is retained in the rifle. I seen the price of mags for this rifle and plus alot of out of stock notices. So it got me a thinking if mine breaks what would I do? Well I figuire maybe some spring steel and a little JB weld will do the trick. Just make sure you have the right thickness of spring steel, the right bend and quenching of the steel since you have to heat to bend it and saving the broken plastic clip part when it breaks off. I will check the local gunsmiths around the DFW area to see if they have any broken mags to see if my ideal pans out. Since I have a full time job and a wife and three kids it will take me a little while plus I have only a .308 axis so I can oly test this out on mine but it should work on any model axis once I get it all figuired out. Just finding the broken mags to work on :smile-new:.

[CJnWy]

When you get that figured out you can start on the 4 little plastic tabs that hold the POS together.....

[s2mikey]

I know - it does seem a little fragile. And, magazines for this thing are like 1/8 the price or more of the entire gun. I hate that. Id like to get some replacements but I hate feeling like Im getting gouged for stuff. $50 bucks for the thing? Ugh! Must be careful.... :(

[DiverEngrSL17K]

The lowest prices I've personally seen for replacement Savage Axis magazines are from Grab-A-Gun in Texas ( www.grabagun.com ) ; they typically run in the $30.00-plus range for blued-finish magazines and in the $40.00-plus range for camoflaged ones. Two nice things about Grab-a-Gun is that they ususally offer free shipping on the magazines and also post in-stock availability on their web site, which helps with ordering. Hope this helps.

[mjadams61]

The lowest prices I've personally seen for replacement Savage Axis magazines are from Grab-A-Gun in Texas ( www.grabagun.com ) ; they typically run in the $30.00-plus range for blued-finish magazines and in the $40.00-plus range for camoflaged ones. Two nice things about Grab-a-Gun is that they ususally offer free shipping on the magazines and also post in-stock availability on their web site, which helps with ordering. Hope this helps.

Well they have them in stock http://grabagun.com/accessories/magazines/savage-arms-mag-axis-243-7mm08-308-camo.html but at $44.65. Like I said if I can find some damaged ones to experiment with. I did find a small hobby metal bender for about 88 bucks that should work to bend the spring steel without heating it up but I will not beable to get it until the end of feb or the first of march, I got three kids that need some dental work :). I figuire the time and material cost after I perfected the repair to be between 10-20 dollars per magazine and also I saw on here somewhere about a M14 mag conversion and maybe my ideal would work on it.

[pisgah]

Believe it or not, some modern plastics are actually superior in applications like this, where repeated flexing is involved. Now, I don't know that this is true with the Axis mag, but the lack of reports of mag catch failure in the Axis (and you KNOW they would show up here and elsewhere) means I for one will abide my time and not worry about it unless and until problems manifest themselves.

[mjadams61]

Believe it or not, some modern plastics are actually superior in applications like this, where repeated flexing is involved. Now, I don't know that this is true with the Axis mag, but the lack of reports of mag catch failure in the Axis (and you KNOW they would show up here and elsewhere) means I for one will abide my time and not worry about it unless and until problems manifest themselves.

That is true but if the M14 mag does fit in the AXIS but does not have a way to latch just maybe my ideal on repairing the OEM mag might work on converting the M14 mag to work properly in the AXIS without having to modify the AXIS itself just the mag. And if the ideal does work I will slap a patent on it lol.

[J.Baker]

Yet another person trying to engineer a solution for a non-problem. I love this site!!!!

The Axis/Edge was introduced in 2010, and since then Savage has sold somewhere in the neighborhood of a 1/2 MILLION Axis rifles (Savage won't disclose specific numbers, but I was able to get that ball park figure from them). In that time I have yet to see a single post on this or any other forum pertaining to a broken magazine catch on an Axis.

[sharpshooter]

And if one of you roughnecks does succeed in breaking one, the replacement cap is $4.00

[CJnWy]

the replacement cap is $4.00

Great point! Where do we findem?
Didnt break the clip on mine but rather the two little plstic tabs on the back that help keep it aliened.....Now it either dosnt pickup the next round or the bolt catches the mag itself.

[s2mikey]

Yet another person trying to engineer a solution for a non-problem. I love this site!!!!

The Axis/Edge was introduced in 2010, and since then Savage has sold somewhere in the neighborhood of a 1/2 MILLION Axis rifles (Savage won't disclose specific numbers, but I was able to get that ball park figure from them). In that time I have yet to see a single post on this or any other forum pertaining to a broken magazine catch on an Axis.

I guess its fair to say its not a problem - but having some extra mags for a reasonable price would be great no matter what! At least one extra should you lose or break one. Or, 3-4 extra mags simply for convenience. I know its just 4 rounds. Actually, even better would be a larger capacity mag for it :cool:

[RatMag]

I would be curious about where to get the bottoms for $4.00 as well. Savage won't sell them as a replacement part, and has no plans of doing so, according to my smith. As of yet, I have not seen a single front release tab break either, but those itty bitty little rear tabs are a whole different story. A huge pain for such a small little piece.

DK

[thermaler]

I've gotten so used to hand-feeding my axis I almost never use the mag (though I'm not going to sell it).

[s2mikey]

Do you guys think leaving the mag in and loading it while installed saves wear and tear as opposed to taking it out each time? Just curious....

[pisgah]

Do you guys think leaving the mag in and loading it while installed saves wear and tear as opposed to taking it out each time? Just curious....



How in the world would you accomplish that??

[thermaler]

How in the world would you accomplish that??I think he means just single-shot hand-load which is what I was referring to. I only do that because unless I'm hunting a quick follow-up isn't necessary since I'm usually testing new loads and wait between shots anyway--as well as I like reducing the amount of mechanical movement in getting the cartridge chambered. Just a personal preference, not saying it's better.

[Rogeritall]

I have to admit that I'm concerned about how that little tab, and or, plastic cover is going to do at below freezing temperature when my wife and I are out Coyote hunting, but we'll just have to be very careful and not try to force it beyond its limits, (we both have Axis rifles in .223rem, hers right handed, mine left handed). Who knows, as others have stated it may be stronger then a steel equivalent would be, but cold and plastic just never seem to be a good combination. I hope it holds up and lasts a lifetime. If it turns out it doesn't, I can afford to buy a new magazine every year or so if I have to, and still be money ahead I think. So far, I've been nothing but impressed with our Aixis rifles.

[s2mikey]

I think he means just single-shot hand-load which is what I was referring to. I only do that because unless I'm hunting a quick follow-up isn't necessary since I'm usually testing new loads and wait between shots anyway--as well as I like reducing the amount of mechanical movement in getting the cartridge chambered. Just a personal preference, not saying it's better.

Yeah, that was it :)

[J.Baker]

I have to admit that I'm concerned about how that little tab, and or, plastic cover is going to do at below freezing temperature when my wife and I are out Coyote hunting, but we'll just have to be very careful and not try to force it beyond its limits, (we both have Axis rifles in .223rem, hers right handed, mine left handed). Who knows, as others have stated it may be stronger then a steel equivalent would be, but cold and plastic just never seem to be a good combination. I hope it holds up and lasts a lifetime. If it turns out it doesn't, I can afford to buy a new magazine every year or so if I have to, and still be money ahead I think. So far, I've been nothing but impressed with our Aixis rifles.

Do you worry about your Glock at below freezing temperatures? How about any number of a hundred plus other handguns that use polymer frames?

I know it's difficult to shake old stigma's, but people really need to get over this idea that all plastic is cheap and brittle and will crack/break at the most inopportune time. Today's polymers that are used in firearms are typically a hybrid mix where high grade Nylon 6 is the major component and they're totally different animals than the old Tenite (cellulose based) plastics that were used on guns back in the 1960's and 70's. The polymers being used in today's plastic trigger guards, magazine plates, pistol grips, etc. are in most cases based off the same Nylon 6 hybrid polymers being used in handgun frames.


http://www.youtube.com/watch?v=tUvMHLaiY1I

[Rogeritall]

Do you worry about your Glock at below freezing temperatures? How about any number of a hundred plus other handguns that use polymer frames?

I know it's difficult to shake old stigma's, but people really need to get over this idea that all plastic is cheap and brittle and will crack/break at the most inopportune time. Today's polymers that are used in firearms are typically a hybrid mix where high grade Nylon 6 is the major component and they're totally different animals than the old Tenite (cellulose based) plastics that were used on guns back in the 1960's and 70's. The polymers being used in today's plastic trigger guards, magazine plates, pistol grips, etc. are in most cases based off the same Nylon 6 hybrid polymers being used in handgun frames.

As I said in my post, I hope it lasts a lifetime, but only time will tell if it does or not. I have read on another forum of an Axis owner who said he has put over a thousand rounds through his rifle and had not had a single problem with the locking clip or cover on his magazine. I'm well aware of the incredible tough new plastics that are available, but by no means expert enough to tell one from the other by sight. And yes, old stigmas die hard, anyone who grew up during the sixties, seventies and even eighties (as I did) has tasted the frustration of cheap plastic stuff that would break or deform very easy. I don't own a Glock, but I am aware of their reputation for durability. Both my wife and my carry conceal pistols are polymer framed, but they don't see too much below freezing temperatures because of body heat while we are carrying them. I've been nothing but impressed so far with my Axis, and most likely will continue to be impressed even if that clip broke off today it would not ruin my overall view of the Axis rifle, and I trust that a company such as Savage would have put it through some very rigorous testing before releasing it for sale. But I will say again that I will be Leary of it in sub freezing weather until it proves me wrong to be so.

BTW... My post was never meant to be a condemnation of the rifle, or company, in any way. If you look at the competing rifles in the same price range, they all have very similar designs, and I'm sure if a person followed reports on them there are probably people worried about the plastic clips breaking off of them also. BTW... None of the competing brands offered their rifles in a Left Hand version which along with the fact that my wife already owned one, and I was impressed with it, was a huge selling point for me. Yes we are a TWO Axis family, possibly soon to be a Three.