First picture upload (thanks Frank)

[Richard Giguere]

Here is a photo of the finished strenghning of the stock. Really not much to see after painting the inside of it black.http://s1272.photobucket.com/upload/albums/frenchyx2/

[Richard Giguere]

Mmmm it didn't upload , guess its back to the drawing board. perhaps my file was to big.

[Richard Giguere]

OK one more timehttp://s1272.photobucket.com/upload/albums/frenchyx2/

[Richard Giguere]

http://s1272.photobucket.com/upload/albums/frenchyx2/

[Richard Giguere]

http://s1272.photobucket.com/upload/albums/frenchyx2/

[Richard Giguere]

http://s1272.photobucket.com/albums/y399/frenchyx2/?action=view&current=Img_9398_zpsa6aeabab.jpg#!oZZ1QQcurrentZZh ttp%3A%2F%2Fs1272.photobucket.com%2Falbums%2Fy399% 2Ffrenchyx2%2F%3Faction%3Dview%26current%3DImg_939 9_zpsb276027c.jpg

[M.O.A.]

Click the vary bottom pick it says IMG CODE

[Richard Giguere]

I dont see anywhere on this thread where it says "img code"
Click the vary bottom pick it says IMG CODE

[devildogandboy]

Richard, send the pics to me and i'll post them for you with your permission!

[M.O.A.]

No no no. Go to your photobucket click on the pic you want to paste, it well come up as a big pic and to the right well be a list of codes click the bottom one it well say IMG code the come back here and right click and paste ;-)

[Richard Giguere]

http://i1272.photobucket.com/albums/y399/frenchyx2/Img_9399_zpsb276027c.jpg[/IMG]

[Richard Giguere]

http://i1272.photobucket.com/albums/y399/frenchyx2/Img_9399_zpsb276027c.jpg[/IMG]

[Richard Giguere]

No no no. Go to your photobucket click on the pic you want to paste, it well come up as a big pic and to the right well be a list of codes click the bottom one it well say IMG code the come back here and right click and paste ;-)

Well I got it finaly, woith all the help from everyone. I do really appreciate it. THANK YOU !!
http://i1272.photobucket.com/albums/y399/frenchyx2/Img_9399_zpsb276027c.jpg[/IMG]

http://i1272.photobucket.com/albums/y399/frenchyx2/Img_9398_zpsa6aeabab

[Richard Giguere]

OK here I will try another....
http://i1272.photobucket.com/albums/y399/frenchyx2/Img_9398_zpsa6aeabab

[Richard Giguere]

Well duh on my part....
http://i1272.photobucket.com/albums/y399/frenchyx2/Img_9398_zpsa6aeabab.jpg

[Richard Giguere]

http://i1272.photobucket.com/albums/y399/frenchyx2/Img_9398_zpsa6aeabab.jpg
Richard, send the pics to me and i'll post them for you with your permission!

I finaly figured it out !! thank you

[fla9-40]

About how many tubes of epoxy does it take to do this?

[fgw_in_fla]

ALRIGHT RICH!!>>>!!!!!!!!<<<<<<


Looks great!
Nice job on the reinforcement work. I'm sure by now you've noticed it feels a lot more like a rifle & less like trying to shoot a water balloon.

Nicely done.

We're all still waiting to see those one hole groups. We'll even settle for a tight looking buckshot pattern, as long as we know it's shooting better...

Good luck with it.

Frank in FLa

[fgw_in_fla]

fla9-40 - If you have an Ace Hardware nearby, they have a package of quick set epoxy that's just enough to do 1 stock as long as your not wasteful. It's not too awfully expensive, too.

They're about 6" long with 2 tubes per package - one tube hardener - one tube of the other stuff I can't remember the name of & I'm too tired to get up & look....

JB Weld also makes a good one,too. They have a 5 min. epoxy that works quite well but it's a few pennies more.

The only one that didn;t work at all was PC7. It was really Elsuckerooni. The workability of the product was hard & it took all night to set and another day to harden. It pulled away from the stock the first time I used it.

Frank in Fla

[Richard Giguere]

Frank I used the Loctite, I hava an account at one of the indutrial supply houses. May have paid more than I should have but the company paid for it anyway !!. I finaly have been able to upload pictures. Take a look at the RIMFIRE thread, I uploaded some pics of the new Boyd's Baracuda stock I ordered for my 22 MKII, it fit perfectly with no in-letting whatsoever.