Accutrigger modification

[Robinhood]

Thanks for sharing Dave! I have built fixtures for the factory triggers too. Getting the angle right for the sear it tough. I try to only polish the trigger with a Dremel and rouge.

[Dave Hoback]

Thanks for sharing Dave! I have built fixtures for the factory triggers too. Getting the angle right for the sear it tough. I try to only polish the trigger with a Dremel and rouge.

I appreciate the kind words my friend! Actually, this is my stoning fixture. It's actually the jig I made to sharpen my knives. I make custome knives, and Japanese water stones are my preference. The armature holds the stones and the angle can be set. On the front of the flat portion, I installed neodymium magnets. These hold the work piece to allow one handed operation, as my left arm/hand are paralyzed. Here's a link to the pic. https://s33.postimg.cc/fkvraedxr/IMG_2433.jpg