I agree. For Factory Axis Bolt Sleeve/Body, you will likely need to find one used. The only place which might be able to supply new is Sharp Shooters Supply. Contact Fred & ask. http://www.sharpshootersupply.com/BoltParts.html

Otherwise both Glades Armory & PT&G have Aftermarket Bolt Sleeves for the Axis.
https://gladesarmory.com/product/sav...-allstainless/

https://pacifictoolandgauge.com/sava...bolt-body.html


I also agree with Jim on the point of Headspace as well. Although some here have argued extensively that replacing the Bolt Body can not change Headspace. Some feel only the Bolt Head replacement merits Headspacing. I have always agreed with your post Jim. Tolerance stacking is precisely what must be taken into account. I continue to recommend checking Headspace regardless of either Bolt Head, Body or Both being replaced.