Quote Originally Posted by Txhillbilly View Post
Welcome to the world of Push Feed Actions. All push feed actions will have case hang ups,it's the nature of the beast.

Dummy rounds won't fix the problem,but a Controlled Feed Action will.
i understand what you are saying. but this issues seems to be specific to my 6.5cm. i think it has to do with the case shoulder angle being so sharp. most other rounds i have, have much more taper to them. the answer (im thinking) will be to have the mag release the round a bit later so that the shoulder of the case is in the chamber before it "snaps up" so that it cannot ride over the bolt face and bind. if i cycle the bolt very slowly it never hangs up. but with (normal for me) speed you get one out of ever mag randomly hang up. cycle it as fast as you can and it never hangs up, but then you get the typical savage bolt bind from pushing/pulling at an off angle. ill get er figured out.