O.K fella's, what is up with my laminated stock! I have had to return TWO and I do Mean 2, laminated stocks recently due to cracking at the top, behind the bolt and rear action srew. It does not go down into the stock/action srew but, across the top. Each crack has been in the same place give or take an 1/8", about an 1 1/4 long. I only noticed the crack after observing the shot group opening up and checking the torque with my torque wrench @ 30/35 " pounds. This is a gun which was replaced under warranty from the high gloss bluing to the mate finish barrel. Any thoughts or will be appreciated. Thanks,