Any ideas on a way to INCREASE the length of pull on my Axis XP .308 would be greatly appreciated.
It currently measures around 13.5"; I need to get up to 14.25".
Thanks in advance.
Do you have the newer style stock or the old style stock? The new style looks like it uses the same recoil pads they use on the 110 stocks with LOP spacers, so if you know someone who has an AccuFit 110 model you could try borrowing a spacer from them to see if it would fit Will need longer screws with the spacer.
A slip-on recoil pad over the existing recoil pad would work, but most I've seen are 1" which would put you at 14.5" LOP.
"Life' is tough. It's even tougher if you're stupid." ~ John Wayne
“Under certain circumstances, urgent circumstances, desperate circumstances, profanity provides a relief denied even to prayer.” —Mark Twain
It’s a newer model, purchased 2 yr’s ago.
The slip on pad is an idea.
I was just hoping someone had done a DIY job of some sort; found some on YouTube for shortening the stock..
I found this while searching on YouTube.
Savage Axis XP and Axis II Stock adjustment and modification
https://m.youtube.com/watch?v=MUdJq8p_R6Y&t=229s
Tolerance is the death of civilization.
Yeah, googled this up too. Not helpful when trying o increase length of pullOriginally Posted by Tiekmir
Posting Permissions
Reply With Quote
Bookmarks